What size is ice maker connection?
What size is ice maker connection?
The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.
What thread is ice maker hose?
Pack of two 3/8” Male Thread x 1/4” compression adapter Use it to connect the ice maker water line to your refrigerator or to connect a humidifier.
Are all ice maker lines the same size?
Tubing Sizes Most flexible plastic water lines for refrigerators come with outside diameters of either 1/4 inch or 5/16 inch, reveals Darrin’s Plumbing Tips. Check your refrigerator’s owner’s manual or the manufacturer’s website for the recommended size and type of water line for your unit.
What size are refrigerator valves?
For a standard kitchen sink shutoff valve, you need a 3/8-by-3/8-by-1/4-inch Add-A-Tee. You also need a 1/4-inch flex water supply tube that is long enough to run from the Add-A-Tee to the refrigerator, plus several feet so you can pull out the fridge without yanking on the water line.
What type of valve is required for a refrigerator with an ice maker?
water solenoid valve
The single water inlet valve, also known as a water solenoid valve, is used for refrigerators. This part is a solenoid-operated switch that releases water from the supply line to the water valve and into the icemaker mold when activated.
Where is shut-off valve for ice maker?
The shut-off valve is usually located under the kitchen sink, in the basement, in a crawl space or in the cabinet next to the refrigerator. There will be a small 1/4 inch copper line attached to the cold water supply line using a saddle valve (t-valve).
Is ice maker line same as water line?
The ice maker supply line is a small plastic, copper, or stainless steel water line that feeds directly into the ice maker. Water pipes are very susceptible to damage it is important that while installing or once it has been installed it is in a position where it is not being bent or shaped in an awkward position.
Why won’t my Frigidaire ice maker make ice?
This usually is due to the water filter being clogged or a restricted water supply. It is recommended to change the water filter first but if the condition still occurs then you want to check for a saddle valve, a water valve not turned on all the way or a kinked water supply line.
How do you cap off a plastic water line to a refrigerator?
The unscrew the adaptor fitting out of the fridge. Reconnect the tube to the adaptor fitting and screw a 3/8″ threaded brass cap onto the end that was connected to the fridge. Use a little pipe dope or teflon tape on the threads. Turn the water back on and inspect the joints for leaks.