How do I find the IP address of my Netgear NAS?

To find the IP address of your ReadyNAS download and run RAIDar. Access the web admin page of the ReadyNAS by clicking Admin Page in RAIDar or enter the URL https://ReadyNAS_IP_address/admin – where ReadyNAS_IP_address is the IP Address seen in RAIDar.

How do I access my Netgear NAS drive?

Visit http://readycloud.netgear.com on a computer that uses the same local area network (LAN) and Internet connection as your ReadyNAS system.

1. Click the Start button under Set up a new ReadyNAS.
2. Click the Discover button.

How do I SSH into my Netgear NAS?

Enabling SSH access for local users using password authentication (local user mode only).

1. Go to System > Settings > Services.
2. Click on SSH.
3. When prompted with the support warning, click Yes if you are sure you want to proceed.
4. Select Enable SSH and Enable password authentication.
5. Click Apply.
6. Go to Accounts > Users.

What is Netgear ReadyNAS default password?

The default credentials to log in to the local admin page are: Username: admin. Password: password.

How do I access my files on ReadyNAS?

To access a share using a network-attached Windows device:

1. Ensure that the SMB file-sharing protocol is enabled on your ReadyNAS system.
2. Enter in the Windows Explorer address bar.
3. Enter a user ID and password.
4. Windows Explorer displays the contents of all available shares on your ReadyNAS system.

Did Netgear discontinue ReadyNAS?

” Netgear recently announced that they are no longer supporting their ReadyNAS storage platforms. ” Is this true? Is Netgear getting out of the NAS business or what is my vendor talking about? Yes; I also have an email into our vendor acct rep to see what he knows…..

How do I access Netgear ReadyNAS duo?

To access the local admin page: Open a web browser and visit https://. is the name that you assigned to your ReadyNAS system or the default host name if you did not change it. Note: You can also enter https://, where is the IP address of the ReadyNAS.

Can I SSH into a Netgear router?

Unfortunately router manufactures, not just Netgear, consider access to the command line via SSH or telnet as a security risk and therefore do not provide. Usually have to install 3rd party firmware such as DD-WRT or Tomato.to get access.

Does NAS device have IP address?

Right-click on the network connection icon and click ‘status’. Click the “Details” button in the window that pops up. Another screen will then appear which will reveal the IP address of your computer, which is also the same IP address as your NAS device.

What is NAS IP address?

This Attribute indicates the identifying IP Address of the NAS which is requesting authentication of the user, and SHOULD be unique to the NAS within the scope of the RADIUS server. NAS-IP-Address is only used in Access-Request packets.