When did Chevy start using independent front suspension?
When did Chevy start using independent front suspension?
1939
HISTORY AND THE MUSTANG II After decades of solid axles pounding across the burgeoning American highway system, Chevrolet introduced one of the first domestic passenger car independent front suspension setups in 1939 (more on this later).
What is the wheelbase of a 1958 Chevy truck?
Performance and Specification Comparison
| Mechanical Comparison | Highest 1958 Values | 1958 Chevrolet Apache |
|---|---|---|
| Horsepower (HP) | 400 | 160 |
| Torque (Ft-Lbs) | 410 | 270 |
| Engine Displacement (CID) | 430 | 283 |
| Wheelbase (in) | 149.5 | 108.25 |
What is the wheel base on a 1950 Chevy truck?
Handling. The 1950 Chevrolet 3100 Pickup has a wheelbase size of 116.00 inches.
How much does a 1951 Chevy 3100 weigh?
The 3100 series trucks rode on 116-inch wheelbases and were equipped with 6 x 16 tires. The trucks measured 196.6 inches from tip to tip and the pickups weighed in at 3,120 lbs. They carried a Gross Vehicle Weight (GVW) rating of 4,200 lbs — or 4,800 lbs if you went with the beefier 6.5 x 16 tires.
What year did Chevy use ifs?
In 1983 General Motors redesigned the front drive axles on its four-wheel-drive S and T trucks. The new design was an independent front suspension (IFS) for better handling and ease of manufacturing and repair. In 1988 GM added IFS front drive axles to its full-size-truck lines (K trucks).
What transmission came in a 1958 Chevy truck?
Transmission Choices A total of five transmissions were available; a three-speed and heavy-duty three-speed manual, three-speed manual with overdrive, four-speed manual, or GM’s Hydra-matic automatic.
What is a Chevy Apache?
Apache was a term used by Chevrolet to cover all of its light-duty truck products, from the ½ ton to the 1.5-ton. It was joined by Viking and Spartan, coveri… For part of two generations, from 1958 to 1961, the entry-le…
What Motor came in a 1950 Chevy truck?
These models came with a 6 cylinder engine, either a 216.5 cubic inch Thriftmaster engine or a 23.5 cubic inch Loadmaster designation. The base model came with the 216.5 size engine. Transmission was a 3 or 4 speed manual transmission.
Do Chevy trucks have a solid front axle?
The Chevy has an independent front suspension and a solid rear axle with an automatic mechanical rear locking differential. This truck has the lowest ground clearance of these three (still very good 10.8 inches). The Trail Boss rides on 32-inch Goodyear Wrangler Duratrac tires.
How much does a 1958 Chevy Apache weight?
Curb Weight: 1745 lbs.